Showing all 12 results
CROSS LINKED PVC/NYLON INSULATED WIRE
1 pair with 0.5 mm Annealed Copper Conductor
CONTROL CABLE – TINNED WIRE, TWO PAIR, 7 X AWG30, LSZH
Item Number: SG-8723
1) Conductor: Size :22AWG Tinned copper conductor to BS4109
2) Insulator: PE insulation Minimum Insulation Diameter: 1.3mm+/-5%
3) Individual Shield: 100% shield coverage (aluminum-polyester foil)
4) Ground Wire: 24AWG stranded tinned copper drain wire
5) Jacket Material: low smoke zero halogen compound
External Diameter: 5 mm +/-5%
8760 1 pair shield control cable
Part Number: SG-8760
Application:
Security Systems
Intercom / PA Systems
Sound/Audio Systems
Power-Limited Controls
Construction:
1) Conductor: Tinned copper wires,AWG18 stranded 16*0.25mm
2) Insulator: PE, Twisted Pair Color: White / Black
3) Overall Shield: Aluminium Foil 100% coverage
4) Drain wire: Tinned copper wires, AWG22 stranded 7*0.25mm
5) Jacket: PVC ( grey color )
8761 1 pair shield control cable
Part Number: SG-8761
Application:
Security Systems
Intercom / PA Systems
Sound/Audio Systems
Power-Limited Controls
Construction:
1) Conductor: Tinned copper wires,AWG22 stranded 7*0.25mm
2) Insulator: PE, Twisted Pair Color: White / Black
3) Overall Shield: Aluminium Foil 100% coverage
4) Drain wire: Tinned copper wires, AWG22 stranded 7*0.25mm
5) Jacket: PVC ( grey color )
Item Number: SG-CE25
This cable meets or exceeds the requirements of ANSI/TIA-568-C.2
Category 5E Cable Tested to 500 MHz
Item Number: S695
This cable meets or exceeds the requirements of TIA/EIA-568.2-1, IEC 11801
Category 6 Cable Tested to 500 MHz
Application: One end is connected to the PSTN or LINE port of the SPL board., the PSTN or xDSL port of the service board. Another end is connected to the main distribution frame (MDF).
Item Number:SG 270C
Fire Resistance – IEC 60332-3 / EN 50266
Smoke Emission – IEC 61034 / EN 50268
Corrosive and Acid Gas Emission – IEC 60754 / EN 50267-2-2
Outdoor Screen Control Cable, 6 pair, Individual shield + Overall shield with steel tape armor
Part Number: SG-803
Item Number: SG6FA
Application: Installing in cable duct / rigid and flexible conducit / junction gateway
This cable meets or exceeds the requirements of IEC 11801 Class D
PCM 1 PAIR SCREENED INTRAOFFICE CABLE
each pair with Individual Shield and Water Blocking Tape and Individual Drain Wire
ICS PB DP BASIC 1x2xAWG22 LSHF
Part Number: SG-DP-B2
Standards:
EN 50170 part 8-2, cable type A, IEC 61158 and IEC 61784
LSHF: IEC 60332-1, IEC 61034-2, IEC 60754-1/2
LSHF-FR: IEC 60332-3-24, IEC 61034-2, IEC 60754-1/2